GD022 — Screw-on Driver Unit Voice Coil 25.4mm
The GD022 is listed in the manufacturer's catalogue as “Screw-on Driver Unit Voice Coil 25.4mm”. Its published specification table states: nominal impedance 4/8 OHM; rated 40W/80W (RMS/MAX); sensitivity 106 dB; published response 1K-15KHz. The complete table is reproduced below, exactly as published.
Manufacturer's description
Our company has been selling this classic screw-on driver for over a decade, and we keep getting reproduction every year. With our HYT-02 or HYT-03 horn, it can reach sensitivity of 105dB. This 25.4mm driver fits most of the horns, and it’s very easy to change the diaphragm. We also offer 34.4mm voice coil, 44.4mm voice coil, or 51.6mm voice coil for the same series.
The text above is the manufacturer's own product description, reproduced as published. The specification table below is the controlling document for figures.
Published specification
| Model | GD022 |
|---|---|
| Nominal Impedance | 4/8 OHM |
| RMS/MAX Power | 40W/80W |
| S.P.L. (1W/1M) | 106 dB |
| FREQ,RESP | 1K-15KHz |
| Voice coil | 25.4mm KSV |
| Diaphragm Material | Titanium |
| Magnet （mm) | 80*40*15(10 Oz) |
| Dimension | φ80*H50(mm) |
| Net weight | 0.69 kg |
Specification table reproduced exactly as published by the manufacturer for this model, including its original field names. Do not carry these figures to any other model — each product page on this site carries only its own model's table.
Where this model fits
The GD022 belongs to the compression drivers family — the engine of a horn loudspeaker system, coupled to a horn flare for PA and stage sound. It is one of the models in that family for which the manufacturer publishes a complete specification table, which is why it has its own page here: buyers comparing drivers for an OEM programme or a wholesale range can work from documented figures instead of a catalogue title alone.
Compare this model against the other fully specified models in the family (linked below), and treat the published table as the reference document: if a figure you need is not in the table — mounting depth drawings, for example, or Thiele-Small parameters — ask the sales team for it. The company states that its acoustic sound testing provides Thiele-Small parameters for its speakers, so ask for the parameter set for this model if your enclosure design depends on it.
Ordering notes
For OEM branding, the manufacturer's published general levels are a 200-piece order for logo application on the dust cap, paper cone, basket or magnet, and a 500-piece order for OEM boxes; the model-specific FAQ term above takes precedence where one is published. Ask the sales team to confirm, in the written quotation for this exact model: the applicable MOQ with your packaging choice, the final specification against the table on this page, the packing quantity, and the lead time for your order — the company describes its lead times as short but publishes no fixed figure.
- Confirm the impedance variant you need where the table lists more than one nominal impedance.
- Confirm the sample process: the manufacturer's product FAQs describe samples as offered for testing once an order is confirmed — ask how that applies to your first order.
- Confirm warranty and after-sales terms for the model in writing before payment.
Related models
Request a quotation for the GD022
Tell us the model, size and quantity you are sourcing. Ask the sales team to confirm the specification, minimum order quantity, packaging and lead time for your exact model in the written quotation before you place an order.