MD-10S30-09 — 10 Inch Plastic Bullet Midrange Speaker
The MD-10S30-09 is listed in the manufacturer's catalogue as “10 Inch Plastic Bullet Midrange Speaker”. Its published specification table states: size 10 inch; nominal impedance 4 ohm; rated 150W/300W (RMS/MAX); sensitivity 93 dB; published response 95Hz-10KHz. The complete table is reproduced below, exactly as published.
Manufacturer's description
A lot of our clients choose 6.5” or 8” midrange speakers. However, this 10” midrange is also in many customers’ favor because it can reach a low frequency of 96Hz. We use plastic bullet with painting, you can customize your special color. The magnet is 30OZ, 1.5” Kapton VC, so the cost is lower.
The text above is the manufacturer's own product description, reproduced as published. The specification table below is the controlling document for figures.
Published specification
| Model | MD-10S30-09 |
|---|---|
| SIZE | 10 inch |
| Cone Material | Pressed paper cone with cloth surround |
| Bullet material | Colorful basket, gasket, plastic bullet with painting |
| Nominal Impedance | 4 ohm |
| RMS/MAX Power | 150W/300W |
| S.P.L. (1W/1M) | 93 dB |
| FREQ,RESP | 95Hz-10KHz |
| Voice coil | 38.6 MM (1.5” KSV) |
| Magnet | 120*60*20(30 Oz) |
Specification table reproduced exactly as published by the manufacturer for this model, including its original field names. Do not carry these figures to any other model — each product page on this site carries only its own model's table.
Where this model fits
The MD-10S30-09 belongs to the midrange speakers family — the vocal and instrument band in the middle of a car audio or PA system, between the subwoofer and the tweeter. It is one of the models in that family for which the manufacturer publishes a complete specification table, which is why it has its own page here: buyers comparing drivers for an OEM programme or a wholesale range can work from documented figures instead of a catalogue title alone.
Compare this model against the other fully specified models in the family (linked below), and treat the published table as the reference document: if a figure you need is not in the table — mounting depth drawings, for example, or Thiele-Small parameters — ask the sales team for it. The company states that its acoustic sound testing provides Thiele-Small parameters for its speakers, so ask for the parameter set for this model if your enclosure design depends on it.
Ordering notes
For OEM branding, the manufacturer's published general levels are a 200-piece order for logo application on the dust cap, paper cone, basket or magnet, and a 500-piece order for OEM boxes; the model-specific FAQ term above takes precedence where one is published. Ask the sales team to confirm, in the written quotation for this exact model: the applicable MOQ with your packaging choice, the final specification against the table on this page, the packing quantity, and the lead time for your order — the company describes its lead times as short but publishes no fixed figure.
- Confirm the impedance variant you need where the table lists more than one nominal impedance.
- Confirm the sample process: the manufacturer's product FAQs describe samples as offered for testing once an order is confirmed — ask how that applies to your first order.
- Confirm warranty and after-sales terms for the model in writing before payment.
Related models
Request a quotation for the MD-10S30-09
Tell us the model, size and quantity you are sourcing. Ask the sales team to confirm the specification, minimum order quantity, packaging and lead time for your exact model in the written quotation before you place an order.